How much drainage rock do I need?
Calculate the drain bed or trench volume, not the surrounding landscape surface area. For a 50 ft trench that is 12 inches wide with 18 inches of rock depth, the volume is about 2.78 cubic yards before waste.
Pipe and fabric are not included
This calculator estimates rock volume only. Pipe diameter, fabric wrap, trench shape, catch basins, cleanouts, outlets, and surface grading should be planned separately.
Use drainage-suitable rock
Decorative stone is not always the right material for drainage. Confirm aggregate size and drainage suitability with the supplier or project specification.
French drain rock example estimates
Examples treat trench length x trench width as area. Pipe, fabric, trench shape, and void space are not subtracted.
| Trench example | Length x width x rock depth | Cubic yards |
|---|---|---|
| Short drain run | 30 ft x 1 ft x 12 in | 1.11 cu yd |
| Medium drain run | 50 ft x 1 ft x 18 in | 2.78 cu yd |
| Wide trench | 50 ft x 1.5 ft x 18 in | 4.17 cu yd |
| Long drain run | 100 ft x 1 ft x 18 in | 5.56 cu yd |
Drain rock coverage by depth
Coverage assumes 1 cubic yard, which is 27 cubic feet. Waste, compaction, settling, and irregular grade are not included.
| Depth | Coverage from 1 cu yd | Coverage from 2 cu yd |
|---|---|---|
| 1 in | 324 sq ft | 648 sq ft |
| 2 in | 162 sq ft | 324 sq ft |
| 3 in | 108 sq ft | 216 sq ft |
| 4 in | 81 sq ft | 162 sq ft |
| 6 in | 54 sq ft | 108 sq ft |
| 12 in | 27 sq ft | 54 sq ft |
Before you calculate
- Measure drain length, width, and rock depth separately from decorative landscape areas.
- Keep pipe, fabric, basin, outlet, and cover-depth details visible as separate planning items.
- Calculate separate drain runs when width, depth, pipe detail, or aggregate type changes.
Common mistakes
- Treating a drainage trench like a shallow decorative rock bed.
- Ordering decorative rock without confirming drainage-suitable aggregate.
- Forgetting that trench shape, pipe, fabric, and uneven bottoms can change real usage.
Formula
cubic yards = (area * (depth / 12) / 27) * (1 + wastePercent / 100)
Assumptions
- Depth is entered in inches.
- Measure separate zones when depth, compaction, slope, or material type changes.
- Fabric, edging, drainage details, delivery, grading, and labor are separate planning items.
Example
Estimated sump pump discharge gravel needed (cubic yards): 2.04 cubic yards
How to calculate sump pump discharge gravel cubic yards
- Measure the target coverage area in square feet.
- Enter the planned finished depth in inches.
- Convert depth to feet, multiply by area, then divide cubic feet by 27 to get cubic yards.
- Add waste for uneven grade, compaction, spreading loss, or ordering increments.
- Confirm supplier units before buying, because bulk material may be sold by cubic yard, ton, or bag.
Before you buy materials
- Confirm aggregate size and drainage suitability with the supplier or project specification.
- Round up for trench irregularity, placement loss, and delivery units.
FAQ
What is the example sump pump discharge gravel cubic-yard result?
Use area, installed depth, cubic-foot to cubic-yard conversion, and waste, then calculate the planning result. In the default example, the result is 2.04 cubic yards.
How do I calculate drainage gravel?
Multiply drain length by width to get area, multiply by rock depth, divide by 27 to get cubic yards, then add waste.
Does this subtract pipe volume?
No. It estimates the trench rock volume as a planning number. Pipe, fabric, and void space can change real usage.
What depth should I use?
Use the rock depth planned for the trench, not the total landscape surface depth. Check the project specification before ordering.
Can I use decorative rock for a French drain?
Do not assume so. Use a drainage-suitable aggregate recommended for the project.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.