How much does landscape edging cost?
Enter total linear footage, material price per foot, labor price per foot, and waste. Use it as a planning number before selecting the edging system.
Curves and corners matter
Curved beds, tight corners, short returns, and transitions can use more pieces or stakes than a straight-line measurement suggests.
Keep accessories separate
Stakes, spikes, connectors, corner pieces, caps, adhesive, excavation, and base prep may be separate from the visible edging material.
Gravel project example estimates
Examples are before waste and before any tonnage conversion. Supplier density and compaction can change the order.
| Project example | Area and depth | Cubic yards |
|---|---|---|
| Path | 150 sq ft at 2 in | 0.93 cu yd |
| Decorative rock bed | 250 sq ft at 3 in | 2.31 cu yd |
| Small parking pad | 300 sq ft at 4 in | 3.70 cu yd |
| Driveway strip | 480 sq ft at 4 in | 5.93 cu yd |
| Deep base layer | 600 sq ft at 6 in | 11.11 cu yd |
Gravel coverage by depth
Coverage assumes 1 cubic yard, which is 27 cubic feet. Waste, compaction, settling, and irregular grade are not included.
| Depth | Coverage from 1 cu yd | Coverage from 2 cu yd |
|---|---|---|
| 1 in | 324 sq ft | 648 sq ft |
| 2 in | 162 sq ft | 324 sq ft |
| 3 in | 108 sq ft | 216 sq ft |
| 4 in | 81 sq ft | 162 sq ft |
| 6 in | 54 sq ft | 108 sq ft |
| 12 in | 27 sq ft | 54 sq ft |
Before you calculate
- Measure each bed edge, paver edge, or lawn border in linear feet.
- Separate straight runs, curves, corners, and material types when they use different pieces.
- Use the stock length and connector system for the selected edging.
Common mistakes
- Forgetting stakes, connectors, corner pieces, and end caps.
- Measuring only straight runs when curved beds need extra cuts.
- Using decorative edging where paver edge restraint is required.
Formula
cost = length * (1 + wastePercent / 100) * (materialCostPerFt + laborCostPerFt)
Assumptions
- Costs are editable planning inputs.
- Corners, curves, cuts, excavation, stakes, connectors, disposal, and minimum charges may be separate.
- Use local supplier and installer pricing before budgeting.
Example
Estimated stone edging cost: 2112 USD
How to estimate stone edging cost
- Measure the total run length in feet.
- Enter editable material cost per foot and labor cost per foot.
- Add waste or planning buffer for cuts, overlaps, corners, access, and minimum charges.
- Multiply adjusted length by the combined per-foot price to estimate cost.
- Confirm local prices, scope, accessories, and installation conditions before using the result as a budget.
Before you buy materials
- Round up to full pieces and verify stake spacing.
- Keep excavation, base prep, spikes, connectors, and labor separate from the main edging count.
FAQ
How do I estimate stone edging cost?
Estimate stone edging cost by using the measured quantity as a cost input, then multiplying by material price, labor or unit price, delivery, and waste where relevant. The default example returns 2112 USD. Quantity detail: Use pieces = ceil((linear feet x (1 + waste percent / 100)) / stock piece length). For a cost estimate, use that quantity as the buying amount, then multiply by unit price and add labor, delivery, prep, waste, and local charges where relevant.
Should I add waste for edging?
Yes. Curves, cuts, corners, damaged pieces, and layout changes usually need a small buffer. For a cost estimate, use that quantity as the buying amount, then multiply by unit price and add labor, delivery, prep, waste, and local charges where relevant.
Does this include stakes or spikes?
No. It estimates main edging pieces or cost. Stakes, spikes, connectors, and corners may be separate.
Can I use one edging type everywhere?
Not always. Paver restraints, metal edging, plastic edging, and stone edging serve different project details.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.