How much loam do I need?
Measure the area in square feet, enter depth in inches, and convert to cubic yards. A 300 sq ft area at 4 inches deep is about 3.70 cubic yards before waste.
Settling and final grade
Soil, topsoil, compost, and fill dirt can settle after placement. Deep fills and raised beds often need extra material compared with a thin topdress.
Bulk delivery vs bags
Bulk soil is often ordered by cubic yard, while bagged soil is sold by cubic feet or quarts. Convert units before comparing prices.
Match the material to the job
Topsoil, fill dirt, compost, potting soil, and raised-bed mix solve different jobs. The calculator estimates volume, not the right soil blend.
Soil and topsoil example estimates
Examples are before waste and settling. Final grade, moisture, and material type can change the quantity.
| Project example | Area and depth | Cubic yards |
|---|---|---|
| Lawn topdress | 500 sq ft at 1 in | 1.54 cu yd |
| Light leveling | 500 sq ft at 2 in | 3.09 cu yd |
| New planting bed | 300 sq ft at 4 in | 3.70 cu yd |
| Deeper soil fill | 300 sq ft at 6 in | 5.56 cu yd |
| Low area fill | 500 sq ft at 12 in | 18.52 cu yd |
Soil coverage by depth
Coverage assumes 1 cubic yard, which is 27 cubic feet. Waste, compaction, settling, and irregular grade are not included.
| Depth | Coverage from 1 cu yd | Coverage from 2 cu yd |
|---|---|---|
| 1 in | 324 sq ft | 648 sq ft |
| 2 in | 162 sq ft | 324 sq ft |
| 3 in | 108 sq ft | 216 sq ft |
| 4 in | 81 sq ft | 162 sq ft |
| 6 in | 54 sq ft | 108 sq ft |
| 12 in | 27 sq ft | 54 sq ft |
Before you calculate
- Measure the finished coverage area and choose the sand depth in inches.
- Keep leveling sand, bedding sand, and fill sand as separate estimates when they serve different layers.
- Use density only when you need a tonnage estimate.
Common mistakes
- Using paver joint sand quantities for bedding sand, or the other way around.
- Ignoring compaction and screeding loss.
- Ordering by bag count without checking bag volume or coverage.
Formula
cubic yards = (area * (depth / 12) / 27) * (1 + wastePercent / 100)
Assumptions
- Depth is entered in inches.
- Soil settling can require extra material.
- The estimate is volume-based.
Example
Estimated sandy loam needed (cubic yards): 4.07 cubic yards
How to calculate sandy loam cubic yards
- Measure the target coverage area in square feet.
- Enter the planned finished depth in inches.
- Convert depth to feet, multiply by area, then divide cubic feet by 27 to get cubic yards.
- Add waste for uneven grade, compaction, spreading loss, or ordering increments.
- Confirm supplier units before buying, because bulk material may be sold by cubic yard, ton, or bag.
Before you buy materials
- Confirm the sand type before ordering, because mason sand, leveling sand, and fill sand are not interchangeable for every job.
- Round up to match bag, yard, or ton delivery increments.
FAQ
What is the example sandy loam cubic-yard result?
Use area, installed depth, cubic-foot to cubic-yard conversion, and waste, then calculate the planning result. In the default example, the result is 4.07 cubic yards.
How do I calculate loam in cubic yards?
Use cubic yards = area x (depth inches / 12) / 27, then add waste or settling allowance if needed.
How much soil for a 4 x 8 raised bed?
At 12 inches deep, a 4 x 8 ft bed needs about 1.19 cubic yards before waste. At 10 inches deep, it needs about 0.99 cubic yards.
Should I include extra soil for settling?
Usually yes for deeper fills, raised beds, and loose bulk soil. Settling varies by material and moisture.
Can I compare bulk soil and bagged soil?
Yes, but convert units first. One cubic yard equals 27 cubic feet, so bag volume matters.
Does this choose the right soil mix?
No. It estimates volume. Choose soil, compost, fill dirt, or raised-bed mix based on the project.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.