How much roof underlayment do I need?
Use roll coverage for the selected felt, synthetic, peel-and-stick, or ice barrier product. Overlaps, valleys, eaves, rakes, and local requirements can increase usage.
Roof area should be pitch-adjusted
Roof material calculators need actual roof surface area, not only the building footprint. Pitch, overhangs, dormers, valleys, and multiple roof planes can increase area and waste.
Use product coverage for final ordering
roof underlayment coverage varies by product. Use the label or supplier specs for final quantity, then plan accessories such as ridge caps, starters, trim, flashing, fasteners, underlayment, and vents separately.
Roof area to roofing squares
One roofing square equals 100 sq ft. Examples include 10% waste and do not include accessories.
| Roof area | Squares before waste | Squares with 10% waste |
|---|---|---|
| 1,200 sq ft | 12 squares | 13.2 squares |
| 2,000 sq ft | 20 squares | 22 squares |
| 2,500 sq ft | 25 squares | 27.5 squares |
| 3,000 sq ft | 30 squares | 33 squares |
Before you calculate
- Use roof area rather than house footprint when the calculator asks for area.
- Account for pitch, waste, hips, valleys, dormers, and roof complexity when applicable.
- Use the coverage value that matches the selected roofing product.
Common mistakes
- Confusing roof squares with square feet.
- Ignoring pitch or complex roof geometry.
- Using bundle coverage without checking the actual product.
Formula
units = ceil((area * (1 + wastePercent / 100)) / coveragePerUnit)
Assumptions
- Use pitch-adjusted roof area when possible.
- Coverage varies by product, overlap, exposure, and installation method.
- Flashing, fasteners, trim, underlayment, ventilation, and repairs may be separate.
Example
Estimated roof felt needed (rolls): 4 rolls
How to calculate roof felt rolls
- Measure the project area in square feet.
- Enter the coverage per roll from the product label or supplier data.
- Add waste for cuts, overlaps, damaged pieces, or layout changes.
- Divide adjusted area by coverage per roll and round up to a whole purchasable unit.
- Check accessories, trim, fasteners, seams, or prep materials separately.
Before you buy materials
- Roofing orders often round to bundles, squares, rolls, or panels.
- Verify quantities with roofing plans or a qualified roofer before purchasing.
FAQ
How many rolls do I need for roof felt?
Use project area, roll coverage, and waste, then round up to the buying unit when the result is sold as whole items. In the default example, the result is 4 rolls.
How do I calculate roof underlayment rolls?
Divide roof surface area by usable roll coverage, then add waste for overlaps, valleys, eaves, rakes, and starter courses.
How much roof underlayment for 1,200 sq ft in this example?
Using 400 sq ft per roll and the page waste setting, the example estimate is 4 rolls.
Is felt coverage the same as synthetic or peel-and-stick underlayment?
No. Roll size, exposure, lap rules, and code requirements differ. Use the selected product's published coverage.
Does this include ice barrier requirements?
Only if you enter the ice-barrier area as part of the measured roof area. Local code may require separate ice-and-water coverage at eaves, valleys, and penetrations.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.