How much soil do I need?
Measure the area in square feet, enter depth in inches, and convert to cubic yards. A 300 sq ft area at 4 inches deep is about 3.70 cubic yards before waste.
Settling and final grade
Soil, topsoil, compost, and fill dirt can settle after placement. Deep fills and raised beds often need extra material compared with a thin topdress.
Bulk delivery vs bags
Bulk soil is often ordered by cubic yard, while bagged soil is sold by cubic feet or quarts. Convert units before comparing prices.
Match the material to the job
Topsoil, fill dirt, compost, potting soil, and raised-bed mix solve different jobs. The calculator estimates volume, not the right soil blend.
Before you calculate
- Measure inside bed dimensions for raised beds, not the outside lumber footprint.
- Use different estimates for topsoil, compost amendments, and fill dirt if the project uses layers.
- Account for settling when filling deep beds or low areas.
Common mistakes
- Using lawn topdressing depth for raised bed fill.
- Forgetting that bagged soil is sold by volume and bulk soil may settle.
- Ignoring existing soil, amendments, and final grade.
Formula
cubic yards = (area * (depth / 12) / 27) * (1 + wastePercent / 100)
Assumptions
- Depth is entered in inches.
- The estimate assumes an even layer over the measured area.
- Compaction, settling, edging, slopes, and supplier sell units can change final ordering.
Example
Estimated horse manure needed (cubic yards): 1.09 cubic yards
How to calculate horse manure cubic yards
- Measure the target coverage area in square feet.
- Enter the planned finished depth in inches.
- Convert depth to feet, multiply by area, then divide cubic feet by 27 to get cubic yards.
- Add waste for uneven grade, compaction, spreading loss, or ordering increments.
- Confirm supplier units before buying, because bulk material may be sold by cubic yard, ton, or bag.
Before you buy materials
- Compare cubic-yard bulk delivery with bagged soil volume before buying.
- For garden beds, verify the material mix rather than buying only by volume.
FAQ
What is the example horse manure cubic-yard result?
Use area, installed depth, cubic-foot to cubic-yard conversion, and waste, then calculate the planning result. In the default example, the result is 1.09 cubic yards.
How do I calculate soil in cubic yards?
Use cubic yards = area x (depth inches / 12) / 27, then add waste or settling allowance if needed.
How much soil for a 4 x 8 raised bed?
At 12 inches deep, a 4 x 8 ft bed needs about 1.19 cubic yards before waste. At 10 inches deep, it needs about 0.99 cubic yards.
Should I include extra soil for settling?
Usually yes for deeper fills, raised beds, and loose bulk soil. Settling varies by material and moisture.
Can I compare bulk soil and bagged soil?
Yes, but convert units first. One cubic yard equals 27 cubic feet, so bag volume matters.
Does this choose the right soil mix?
No. It estimates volume. Choose soil, compost, fill dirt, or raised-bed mix based on the project.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.