How much soil do I need?
Measure the area in square feet, enter depth in inches, and convert to cubic yards. A 300 sq ft area at 4 inches deep is about 3.70 cubic yards before waste.
Settling and final grade
Soil, topsoil, compost, and fill dirt can settle after placement. Deep fills and raised beds often need extra material compared with a thin topdress.
Bulk delivery vs bags
Bulk soil is often ordered by cubic yard, while bagged soil is sold by cubic feet or quarts. Convert units before comparing prices.
Match the material to the job
Topsoil, fill dirt, compost, potting soil, and raised-bed mix solve different jobs. The calculator estimates volume, not the right soil blend.
Soil and topsoil example estimates
Examples are before waste and settling. Final grade, moisture, and material type can change the quantity.
| Project example | Area and depth | Cubic yards |
|---|---|---|
| Lawn topdress | 500 sq ft at 1 in | 1.54 cu yd |
| Light leveling | 500 sq ft at 2 in | 3.09 cu yd |
| New planting bed | 300 sq ft at 4 in | 3.70 cu yd |
| Deeper soil fill | 300 sq ft at 6 in | 5.56 cu yd |
| Low area fill | 500 sq ft at 12 in | 18.52 cu yd |
Soil coverage by depth
Coverage assumes 1 cubic yard, which is 27 cubic feet. Waste, compaction, settling, and irregular grade are not included.
| Depth | Coverage from 1 cu yd | Coverage from 2 cu yd |
|---|---|---|
| 1 in | 324 sq ft | 648 sq ft |
| 2 in | 162 sq ft | 324 sq ft |
| 3 in | 108 sq ft | 216 sq ft |
| 4 in | 81 sq ft | 162 sq ft |
| 6 in | 54 sq ft | 108 sq ft |
| 12 in | 27 sq ft | 54 sq ft |
Before you calculate
- Measure inside bed dimensions for raised beds, not the outside lumber footprint.
- Use different estimates for topsoil, compost amendments, and fill dirt if the project uses layers.
- Account for settling when filling deep beds or low areas.
Common mistakes
- Using lawn topdressing depth for raised bed fill.
- Forgetting that bagged soil is sold by volume and bulk soil may settle.
- Ignoring existing soil, amendments, and final grade.
Formula
cost = area * (1 + wastePercent / 100) * (materialCostPerSqFt + laborCostPerSqFt)
Assumptions
- Depth, compaction, moisture, product size, and supplier delivery minimums can change final quantity.
- Measure each pad, path, bed, drain, and border separately when material or depth changes.
- Round up to full bags, tons, cubic yards, or delivery increments before ordering.
Example
Estimated garden soil delivery cost: 630 USD
How to estimate garden soil delivery cost
- Measure the project area in square feet.
- Enter editable material cost and labor cost per square foot.
- Add waste or planning buffer when material quantity changes with cuts or layout.
- Multiply adjusted area by the combined cost rate.
- Use local quotes and project scope notes before treating the result as a budget.
Before you buy materials
- Compare cubic-yard bulk delivery with bagged soil volume before buying.
- For garden beds, verify the material mix rather than buying only by volume.
FAQ
How do I estimate garden soil delivery cost?
Estimate garden soil delivery cost by using the measured quantity as a cost input, then multiplying by material price, labor or unit price, delivery, and waste where relevant. The default example returns 630 USD. Quantity detail: Use cubic yards = area x (depth inches / 12) / 27, then add waste or settling allowance if needed. For a cost estimate, use that quantity as the buying amount, then multiply by unit price and add labor, delivery, prep, waste, and local charges where relevant.
How much soil for a 4 x 8 raised bed?
At 12 inches deep, a 4 x 8 ft bed needs about 1.19 cubic yards before waste. At 10 inches deep, it needs about 0.99 cubic yards. For a cost estimate, use that quantity as the buying amount, then multiply by unit price and add labor, delivery, prep, waste, and local charges where relevant.
Should I include extra soil for settling?
Usually yes for deeper fills, raised beds, and loose bulk soil. Settling varies by material and moisture.
Can I compare bulk soil and bagged soil?
Yes, but convert units first. One cubic yard equals 27 cubic feet, so bag volume matters. For a cost estimate, use that quantity as the buying amount, then multiply by unit price and add labor, delivery, prep, waste, and local charges where relevant.
Does this choose the right soil mix?
No. It estimates volume. Choose soil, compost, fill dirt, or raised-bed mix based on the project.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.