How much does a paver project cost?
Enter the measured project area, material cost per square foot, labor cost per square foot, and waste. The calculator returns a planning estimate, not a fixed masonry quote.
Paved area comes first
Measure each paved rectangle or section before pricing. Curves, borders, cuts, base prep, bedding sand, joint sand, and drainage can change the full project budget.
What is not included
Base excavation, geotextile, gravel, bedding sand, edging, compaction, demolition, drainage, delivery, and disposal can be separate from a simple paver-area cost.
Masonry wall cost example checks
Examples use broad combined material and labor planning inputs. Footings, drainage, reinforcement, caps, excavation, and local prices can change real cost.
| Project example | Wall area | Planning cost |
|---|---|---|
| Small block wall | 120 sq ft | $1,560 |
| Garage foundation wall | 240 sq ft | $3,120 |
| Brick garden wall | 120 sq ft | $2,040 |
| Retaining wall face | 160 sq ft | $2,720 |
Masonry unit coverage reference
Coverage varies with unit size and joint layout. Use actual units and bond pattern for final takeoff.
| Unit | Planning face coverage | Units for 160 sq ft with 10% waste |
|---|---|---|
| 8 x 8 x 16 CMU / concrete block | 0.89 sq ft | 198 blocks |
| Modular brick face example | 0.22 sq ft | 800 bricks |
| General building material | Use product coverage | Divide area by unit coverage, then add waste |
Before you calculate
- Measure each patio, driveway, walkway, border, and landing section separately.
- Keep base prep, bedding sand, joint sand, edging, and demolition separate if they use different rates.
- Use local paver and installer prices before budgeting.
Common mistakes
- Pricing pavers from surface units without including base and edge work.
- Ignoring curves, border cuts, stairs, drainage, and compaction requirements.
- Using the calculator result as an installed quote.
Formula
cost = length * (1 + wastePercent / 100) * (materialCostPerFt + laborCostPerFt)
Assumptions
- Masonry quantities depend on unit size, joint width, waste, wall layout, cuts, openings, and product yield.
- Estimate blocks, brick, mortar, veneer, caps, and pavers separately when materials differ.
- Structural design, reinforcement, drainage, and code requirements are separate.
Example
Estimated garden pavilion paver edge cost: 874 USD
How to estimate garden pavilion paver edge cost
- Measure the total run length in feet.
- Enter editable material cost per foot and labor cost per foot.
- Add waste or planning buffer for cuts, overlaps, corners, access, and minimum charges.
- Multiply adjusted length by the combined per-foot price to estimate cost.
- Confirm local prices, scope, accessories, and installation conditions before using the result as a budget.
Before you buy materials
- Round pavers to full pallets or bundles.
- Confirm base gravel, bedding sand, edging, polymeric sand, delivery, and disposal separately.
FAQ
How do I estimate paver project cost?
Use cost = wall area x (material cost per sq ft + labor cost per sq ft), then add waste if needed. Use local prices for final budgeting.
Should I subtract doors and windows?
Subtract large openings for a detailed takeoff, but keep a waste buffer for cuts, corners, breakage, and layout changes.
Does this include mortar, rebar, footing, or grout?
No. Pavers, base, bedding sand, edging, polymeric sand, compaction, and labor are often estimated as separate lines unless you include them in the inputs.
Is this a structural wall design?
No. It is a cost planning calculator. Structural design, reinforcement, drainage, footing, and code requirements are separate.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.