How much topsoil do I need?
Measure the area in square feet, enter depth in inches, and convert to cubic yards. A 300 sq ft area at 4 inches deep is about 3.70 cubic yards before waste.
Settling and final grade
Soil, topsoil, compost, and fill dirt can settle after placement. Deep fills and raised beds often need extra material compared with a thin topdress.
Bulk delivery vs bags
Bulk soil is often ordered by cubic yard, while bagged soil is sold by cubic feet or quarts. Convert units before comparing prices.
Match the material to the job
Topsoil, fill dirt, compost, potting soil, and raised-bed mix solve different jobs. The calculator estimates volume, not the right soil blend.
Soil and topsoil example estimates
Examples are before waste and settling. Final grade, moisture, and material type can change the quantity.
| Project example | Area and depth | Cubic yards |
|---|---|---|
| Lawn topdress | 500 sq ft at 1 in | 1.54 cu yd |
| Light leveling | 500 sq ft at 2 in | 3.09 cu yd |
| New planting bed | 300 sq ft at 4 in | 3.70 cu yd |
| Deeper soil fill | 300 sq ft at 6 in | 5.56 cu yd |
| Low area fill | 500 sq ft at 12 in | 18.52 cu yd |
Soil coverage by depth
Coverage assumes 1 cubic yard, which is 27 cubic feet. Waste, compaction, settling, and irregular grade are not included.
| Depth | Coverage from 1 cu yd | Coverage from 2 cu yd |
|---|---|---|
| 1 in | 324 sq ft | 648 sq ft |
| 2 in | 162 sq ft | 324 sq ft |
| 3 in | 108 sq ft | 216 sq ft |
| 4 in | 81 sq ft | 162 sq ft |
| 6 in | 54 sq ft | 108 sq ft |
| 12 in | 27 sq ft | 54 sq ft |
Common density planning values
Use supplier-provided density for final tonnage. These broad values are planning placeholders, not product specifications.
| Material | Broad planning density | Notes |
|---|---|---|
| Gravel / crushed stone | 2,600-3,000 lb/cu yd | Varies by gradation, moisture, and compaction. |
| Sand | 2,400-3,000 lb/cu yd | Moisture can noticeably change weight. |
| Topsoil / dirt | 1,800-2,600 lb/cu yd | Moisture and organic matter change density. |
| Mulch | 400-1,000 lb/cu yd | Usually ordered by volume, not weight. |
| Compost | 800-1,500 lb/cu yd | Depends on moisture and material mix. |
Before you calculate
- Measure inside bed dimensions for raised beds, not the outside lumber footprint.
- Use different estimates for topsoil, compost amendments, and fill dirt if the project uses layers.
- Account for settling when filling deep beds or low areas.
Common mistakes
- Using lawn topdressing depth for raised bed fill.
- Forgetting that bagged soil is sold by volume and bulk soil may settle.
- Ignoring existing soil, amendments, and final grade.
Formula
coverage sq ft = ((weightTons * 2000 / densityPerCubicYard) * 27) / (depth / 12)
Assumptions
- Density varies by supplier, moisture, screening size, and compaction.
- Coverage depends on depth, so compare the calculator depth with the actual layer plan.
- Use supplier weight-to-volume guidance for final ordering.
Example
Estimated 8 tons topsoil coverage: 785 sq ft
How to calculate 8 tons topsoil coverage
- Convert the entered material weight to volume using supplier density.
- Convert the target depth from inches to feet.
- Divide cubic feet by depth in feet to estimate square-foot coverage.
- Use separate estimates for different depths or material zones.
- Adjust for compaction, moisture, uneven grade, and product-specific coverage before buying.
Before you buy materials
- Compare cubic-yard bulk delivery with bagged soil volume before buying.
- For garden beds, verify the material mix rather than buying only by volume.
FAQ
What is the example 8 tons topsoil square-foot result?
Use material weight, depth, density, then calculate the planning result. In the default example, the result is 785 sq ft.
How do I calculate topsoil in cubic yards?
Use cubic yards = area x (depth inches / 12) / 27, then add waste or settling allowance if needed.
How much soil for a 4 x 8 raised bed?
At 12 inches deep, a 4 x 8 ft bed needs about 1.19 cubic yards before waste. At 10 inches deep, it needs about 0.99 cubic yards.
Should I include extra soil for settling?
Usually yes for deeper fills, raised beds, and loose bulk soil. Settling varies by material and moisture.
Can I compare bulk soil and bagged soil?
Yes, but convert units first. One cubic yard equals 27 cubic feet, so bag volume matters.
Does this choose the right soil mix?
No. It estimates volume. Choose soil, compost, fill dirt, or raised-bed mix based on the project.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.