How much area does gravel cover?
Coverage depends on volume and depth. One cubic yard covers about 162 sq ft at 2 inches deep, 108 sq ft at 3 inches, or 81 sq ft at 4 inches before waste.
Depth changes coverage quickly
The same stone covers more area at a shallow decorative depth and less area at a thicker drainage or base depth. Calculate separate zones when depths differ.
Density matters for ton-based coverage
Tons are weight, not volume. Supplier density is the best input for converting stone tons into cubic yards and coverage area.
Gravel project example estimates
Examples are before waste and before any tonnage conversion. Supplier density and compaction can change the order.
| Project example | Area and depth | Cubic yards |
|---|---|---|
| Path | 150 sq ft at 2 in | 0.93 cu yd |
| Decorative rock bed | 250 sq ft at 3 in | 2.31 cu yd |
| Small parking pad | 300 sq ft at 4 in | 3.70 cu yd |
| Driveway strip | 480 sq ft at 4 in | 5.93 cu yd |
| Deep base layer | 600 sq ft at 6 in | 11.11 cu yd |
Gravel coverage by depth
Coverage assumes 1 cubic yard, which is 27 cubic feet. Waste, compaction, settling, and irregular grade are not included.
| Depth | Coverage from 1 cu yd | Coverage from 2 cu yd |
|---|---|---|
| 1 in | 324 sq ft | 648 sq ft |
| 2 in | 162 sq ft | 324 sq ft |
| 3 in | 108 sq ft | 216 sq ft |
| 4 in | 81 sq ft | 162 sq ft |
| 6 in | 54 sq ft | 108 sq ft |
| 12 in | 27 sq ft | 54 sq ft |
Before you calculate
- Measure the area to be covered, then choose the compacted depth you actually need.
- Calculate driveways, paths, drains, and base layers separately when depths differ.
- Use density inputs only when converting volume into tons or weight.
Common mistakes
- Ordering by tons without checking the supplier's density assumption.
- Forgetting compaction for base layers.
- Combining decorative top rock and structural base rock into one estimate.
Formula
coverage sq ft = (cubicYards * 27) / (depth / 12)
Assumptions
- Coverage depends directly on layer depth.
- Compaction, settling, uneven grade, and waste can reduce real coverage.
- Use supplier guidance before final ordering.
Example
Estimated 15 yards gravel coverage coverage: 2430 sq ft
How to calculate 15 yards gravel coverage
- Convert the entered cubic yards to cubic feet by multiplying by 27.
- Convert the target depth from inches to feet.
- Divide cubic feet by depth in feet to estimate square-foot coverage.
- Use separate estimates for different depths or material zones.
- Adjust for compaction, moisture, uneven grade, and product-specific coverage before buying.
Before you buy materials
- Ask whether the supplier sells by cubic yard, ton, scoop, or bag.
- For compacted base, plan for placement and compaction rather than loose depth alone.
FAQ
What is the example 15 yards gravel square-foot result?
Use material volume, depth, then calculate the planning result. In the default example, the result is 2430 sq ft.
How do I calculate gravel coverage?
Multiply cubic yards by 27 to get cubic feet, then divide by depth in feet to get square feet of coverage.
How many square feet does 1 cubic yard of stone cover?
One cubic yard covers about 162 sq ft at 2 inches deep, 108 sq ft at 3 inches, or 81 sq ft at 4 inches before waste.
How many square feet does 1 ton of stone cover?
It depends on density and depth. At 2,800 lb per cubic yard, 1 ton covers about 77 sq ft at 3 inches deep before waste.
Should I include compaction or waste?
Yes for base layers, drainage stone, uneven grade, and delivery loss. Decorative stone may also need visual adjustment.
Related calculators
This calculator is for planning estimates only. Verify final quantities with product labels, project conditions, and a qualified professional when accuracy matters.